Quality Section Incharge (Enamel)

vidyawires· QUALITY ASSURANCE
Apply Now ↗
📍 Nadiad , GJ, IndiaFULL TIME

About this role

1. Job Purpose
To ensure the quality of Copper Busbar, Rolled Copper, Up-Cast Copper and Copper Components by effectively controlling incoming material, in-process and final product quality, reducing rejection and rework, resolving quality problems and ensuring compliance with customer specifications, drawings and applicable standards.

2. Key Responsibilities
A. In-Process & Final Quality Control
    • Monitor quality of products manufactured in the assigned sections.
    • Ensure inspection of raw material, in-process material and finished products.
    • Check product dimensions, surface quality, conductivity, mechanical properties and other specified parameters.
    • Ensure products are manufactured as per approved drawings, specifications and quality standards.
    • Approve first-piece / first-off samples before regular production.
    • Ensure proper final inspection before releasing products to Stores / Dispatch.
    • Identify and immediately report quality deviations to Production and Quality Head.
B. Process Quality – Up-Caster & Rolling Mill
    • Monitor quality parameters of the Up-Casting and Rolling Mill processes.
    • Identify defects such as cracks, scratches, surface defects, dimensional variation, edge defects and other abnormalities.
    • Coordinate with Production and Maintenance for correction of process-related quality problems.
    • Monitor critical process parameters and ensure adherence to defined standards.
    • Maintain quality records and analyse recurring defects.
C. Copper Busbar & Components Quality
    • Inspect Copper Busbars and Copper Components as per customer drawings and specifications.
    • Check:
    • Width
    • Thickness
    • Length
    • Hole / slot dimensions
    • Straightness / flatness
    • Surface finish
    • Burrs and edge condition
    • Conductivity
    • Other customer-specific requirements
    • Ensure proper identification and segregation of OK, Hold, Rework and Rejected material.
    • Verify reworked material before final acceptance.
D. Rejection & Quality Improvement
    • Monitor daily rejection, rework and scrap.
    • Analyse major quality problems and identify their root causes.
    • Conduct 5 Why / Fishbone / Pareto analysis wherever required.
    • Implement corrective and preventive actions with Production and other concerned departments.
    • Work continuously to reduce internal rejection, rework and quality losses.
    • Take initiatives for improving First Pass Yield and Right First Time (RFT).
E. Customer Complaints
    • Support investigation of customer complaints.
    • Analyse complaint samples, inspection data and process records.
    • Coordinate with Production and other departments to identify root causes.
    • Prepare corrective action / 8D / CAPA reports wherever required.
    • Ensure timely closure of customer complaints.
    • Monitor repeat complaints and take preventive action.
F. Measuring & Testing Equipment
    • Ensure availability of required measuring and testing instruments.
    • Ensure instruments are properly calibrated.
    • Maintain calibration records.
    • Prevent use of damaged or expired calibration instruments.
    • Ensure proper handling and storage of measuring equipment.
G. Quality Documentation
Maintain proper records of:
    • Incoming inspection
    • In-process inspection
    • Final inspection
    • Test reports
    • Rejection / rework
    • NCRs
    • Customer complaints
    • Corrective actions
    • Calibration
    • First-piece approval
    • Quality performance reports
H. Team Management
    • Supervise Quality Inspectors / Engineers / Technicians working in the assigned area.
    • Allocate inspection responsibilities and monitor their work.
    • Train team members on product specifications, inspection methods and measuring instruments.
    • Ensure discipline, attendance, safety and proper working practices within the Quality team.
    • Develop technical skills of team members.
I. Coordination
Coordinate closely with:
    • Production – Process control and rejection reduction
    • Maintenance – Machine-related quality problems
    • PPC – Production planning and inspection requirements
    • Purchase / Stores – Incoming material quality
    • R&D / Technical – New products and specifications
    • Sales / Customer Service – Customer complaints and technical requirements
3. Key Quality Areas
The incumbent will be primarily responsible for:
    • Copper Up-Caster quality
    • Copper Rolling Mill quality
    • Copper Busbar quality
    • Copper Component quality
    • Dimensional accuracy
    • Electrical conductivity
    • Surface quality
    • Mechanical properties
    • Customer specification compliance
    • Process quality
    • Rejection and rework control

Education
    • Diploma / B.E. / B.Tech. in Mechanical / Production / Electrical Engineering or relevant discipline.
Experience
    • 5–10 years of relevant experience in Quality Control / Quality Assurance.
    • Experience in Copper / Aluminium / Non-Ferrous Metal / Busbar / Rolling Mill / Continuous Casting / Electrical Conductor manufacturing will be preferred.
4. Technical Skills
The candidate should have knowledge of:
    • Copper manufacturing processes
    • Up-Casting / Continuous Casting
    • Rolling Mill process
    • Copper Busbar manufacturing
    • Copper Components
    • Dimensional inspection
    • Electrical conductivity testing
    • Mechanical testing
    • Engineering drawings
    • Measuring instruments
    • SPC and basic statistical tools
    • 7 QC Tools
    • 5 Why / Root Cause Analysis
    • CAPA / 8D
    • Calibration
    • Quality documentation

Frequently Asked Questions

Is the salary disclosed for the Quality Section Incharge (Enamel) position at vidyawires?
The salary for this Quality Section Incharge (Enamel) role at vidyawires is not publicly listed. Click "Apply Now" to learn more about the compensation package on their official careers page.
Where is the Quality Section Incharge (Enamel) position at vidyawires located?
This Quality Section Incharge (Enamel) role at vidyawires is based in Nadiad , GJ, India. The position is listed as on-site or hybrid. Check the full job description or apply directly to confirm the work arrangement.
Is the Quality Section Incharge (Enamel) role at vidyawires full-time or part-time?
This is listed as a FULL TIME position. It is posted as a Quality Section Incharge (Enamel) role in the QUALITY ASSURANCE department at vidyawires.
Which team or department does the Quality Section Incharge (Enamel) at vidyawires belong to?
This Quality Section Incharge (Enamel) position is part of the QUALITY ASSURANCE department at vidyawires. See the full job description for more information about the team structure and responsibilities.
How do I apply for the Quality Section Incharge (Enamel) position at vidyawires?
Click the "Apply Now" button on this page. You will be redirected to vidyawires's official application portal hosted on keka where you can submit your application directly.
When was the Quality Section Incharge (Enamel) job at vidyawires posted?
This Quality Section Incharge (Enamel) position at vidyawires was posted on Aug 20, 2026. Apply as soon as possible — early applications are often reviewed first.
Quality Section Incharge (Enamel)
vidyawires
Apply for this role ↗

You'll be redirected to vidyawires's official application page on keka.